Filter
Top Products
3
C. Disassembling the screen:
Follow the steps below and Fig. 4.
1. Unlock the Adjustment Handle by pulling the locking tab to the left and slowly slide the handle all
the way down to bring down the position of the screen’s case.
2. Hold the Extension Bar and twist the Vertical Locking Sleeve Ring counter-clockwise to unlock
and release the position of the extension bar. Once the extension bar has been brought all the way down,
unhook the screen material from the Top Hook and slowly retract the screen back into the case.
* Note: It is very important to remember to hold the extension bar first and then unlock the sleeve to
prevent the extension bar from slamming and damaging the screen.
3. Turn the screen’s case vertically clockwise and insert the Top Hook’s bottom pin to lock into the
screen’s end cap hole.
4. Close the tripod legs by pushing them in. Lastly, tighten the Vertical Locking Sleeve Ring by
twisting it clockwise.
Fig. 4
Note: To ensure the screen is stable, extend the tripod’s legs as much as possible.
Do not fold the screen or allow any sharp objects to touch the screen’s surface.
Clean the screen surface often when needed.
Careful use will extend the lifetime of this product.
1
2
3
4