Filter
Top Products
- 42 -
Setting up
• Start the Web browser from the host
connected to the Presenter.
• Enter the IP address or host name (if
allocated) of the Presenter, following
[http://], in the address column of the
Web browser provided for entering
the URL to be opened.
• When the HV-800SX/8000SX/
8500SX page is displayed in the Web
browser, click the link
[SET UP].
• Then, the Configurations page is
displayed. Confirm the settings, and
click the link
[FTP Client
Configuration]
.
To display the FTP Client Setting
Input page, the authentication by the
login password is required.
When the entry of the password is requested, enter [root] or [user] for the user
name and enter the password set at the Network Setting Input page. No password
has been factory set. When the Presenter remains in the factory set condition, enter
no password.
• When the FTP Client Setting Input page is displayed, change the set values
according to the host at the saving destination. To reset the changed set values to the
original set values, click the clear button
[CLEAR].
• When all items have been set, click the submit button
[SUBMIT].When the
message “The saving of the setup was completed.” is displayed, the setting up of the
network is completed.
If the message “Incorrect value of setting exists. Please set up again.” is displayed
when the submit button
[SUBMIT] is clicked, there is an incorrect value entered for
setting. Go back to the FTP Client Setting Input page and redo the setting.
Reference Page · Appendix: Setting items of the FTP client P.44