Filter
Top Products
16 User’s Guide
POWER MANAGEMENT FUNCTION
The monitor is equipped with the power management function which automatically reduce the
power consumption when not in use in three power level modes.
• Stand-by Mode
The monitor goes into stand-by mode when the horizontal sync signal is off for about 10
seconds. In this mode, the screen goes off and the power LED blinks for 1 seconds On and
1 second Off. The screen is displayed after the horizontal sync signal is restored.
• Suspend Mode
The monitor goes into suspend mode when the vertical sync signal is off for about 10
seconds. The power consumption during this is less than 8 W. In this mode, the screen
goes off and the power LED blinks for 1 seconds On and 1 second Off. The screen is
displayed after the vertical sync signal is restored.
• Off Mode
The monitor goes into power-off mode when the vertical and horizontal sync signals are
off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for 1
seconds On and 1 second Off. The screen is displayed after the vertical and horizontal
sync signals are restored.
Power Management System
The AMM170TK2, AMM17TK2, AMM18TK2, AMM19TK2 and AMM19TK2/HB Medical
Monitor complies with the VESA DPMS power management proposal. The VESA DPMS
proposal provides four phases of power-saving modes by detecting the horizontal sync
signal as shown in the table blow.
When the monitor is power saving mode or detects an incorrect timing, the screen will be
blank and power LED indicator will blink.
edoMrewoPtupnICD
)ylnorotinom(
rewoptupnICA
)retpadaCA.lcnI(
sutatSDEL
nO.xamW53.xamW06neerGydaetS
ybdnatS.xamW5
.4.xamW6neerGgniknilB
dnepuS.xamW5.4.xamW6neerGgniknilB
ffO.xamW5.4.xamW6neerGgniknilB