Filter
Top Products
Specifications
11
8.0 SPECIFICATIONS
This 3U POD is intended for use with a UPS meeting all the following requirements:
• UPS input cord is compatible with the rating and type of receptacle on the 3U POD labeled “CON-
NECT UPS LINE CORD HERE.”
• UPS output receptacle is compatible with the 3U POD input power connector labeled “UPS.”
• Available utility is compatible with the 3U POD input connection and an appropriately sized
branch circuit breaker has been provided.
Table 2 Breaker specifications
8.1 Product Warranty Registration
To register for warranty protection:
•Visit the Quick Links section of our Web site at:
http://www.liebert.com
• Click on Product Warranty Registration and fill in the form.
If you have any questions, please contact us at:
US: 800-222-5877
Outside the US: 614-841-6755
upstech@liebert.com
Transfer Time (to and from maintenance bypass) < 6 milliseconds
Operating Ambient Temperature 32°F to 104°F (0°C to +40°C)
Storage Ambient Temperature -4°F to 140°F (-20°C to +60°C)
Dimensions with brackets W x D x H: in. (mm) 19.0 x 5.24 x 5.24 (482.6 x 133 x 133)
Humidity 0 to 95% non-condensing
Agency/Standards UL1778, c-UL, ISTA Procedure 1A
Electrical Rating See Model Label on 3U POD
Model
VA - Volt
Rating
Input Current
Rating
at 208V
Recommended
(Maximum) External
Overcurrent Protection
Recommended Wire
(including ground wire)
(75ºC copper wire)
Maximum Wire
Accepted by
Terminal Block
Terminal
Tightening
Torque
MP2-220N 16A 20A 12 AWG 10 AWG 20 in-lb