Filter
Top Products
13
4. Use the enclosed support bases for the tower
option to prevent tip-over. One additional set
of support base extensions ships with each
external battery cabinet.
5. Connect the supplied external battery cabi-
net cable to the rear of the external battery
cabinet, then to the rear of the UPS.
6. Turn ON the battery breaker on the rear of
the external battery cabinet.
7. The UPS is now equipped with additional
backup battery run time. For approximate
battery run times, refer to the Battery
Run Times charts in this manual.
NOTE
You must use the included Configuration Program to specify the
number of external battery cabinets connected to the UPS. For more
information, see Configuration Program on page 22.