Emerson N400C Laptop User Manual


 
5–36 Maintenance and Service Guide
Removal and Replacement Procedures
Steps 12 through 16 apply only to Evo Notebook N400c models.
12. Remove the RJ45/RJ11 connector module
1
from the base
enclosure (Figure 5-28).
13. Disconnect the microphone cable
2
from the display lid
switch board.
14. Disconnect the microphone cable
3
from the system board.
15. Remove the PM2.0 × 4.0 screw
4
that secures the display lid
switch board to the base enclosure.
16. Remove the modem cable.
Figure 5-28. Removing the Modem Cable on Evo Notebook
N400c Models
Reverse the above procedure to install the modem cable.