Filter
Top Products
Reference Guide
D5092
11-Dec-2007 - Page 14
Alarm Printer View
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
1.3.2.1 Features
1.3.2.1.1 Selected Databases List
Displays the databases from which the Alarm Printer will source alarms.
1.3.2.1.2 Add Database Dialog
Enables the user to add an OpenEnterprise Database to the 'Selected Databases' List.
A remote database is defined by the Server's DNS name(s) followed by a colon, followed by 'rtrdb1'
(eg OEServer:rtrdb1). There is a comma in between each server if the Database is running in
Redundant mode- (eg Master1:rtrdb,Master2:rtrdb1). OpenEnterprise Databases may also be defined
by IP addresses (eg 102.10.0.90:rtrdb1,102:10.0.91:rtrdb1). The Server DNS names may be aliased
using the Hosts file found in the 'C:\Winnt\System32\Drivers\etc' directory. This allows
Databases to be named independently of specific IP addresses or DNS names. A sample Hosts entry
is shown below: -
101.100.0.183 oeserv1 oedwat1 #pserv1
101.100.0.184 oeserv2 oedwat2 #pserv1
The IP addresses of the Servers are given on the left, then after a space or tab each alias name is
specified. In the example above there are two alias names defined for each Server. The hash
indicates that what follows is a comment. After the hash above the real DNS names of the Servers is
given as a reminder. With the above Hosts file, 'pinging' oeserv1 would result in a reply from the
machine with the IP address 101.100.0.183, even though its real DNS name is pserv1.