Filter
Top Products
52X DDS CD-RW Drive
5
6. Connect the USB cable at the back of the drive to the USB header
on the computer’s motherboard. The red wire of the cable needs to
be plugged into Pin 1 on the board.
This drive supports USB 2.0 and if you connect to USB 1.1
connector, only transfer rate of USB 1.1 will be available.
If the connection is correct, the lower right LED on the front panel
will light green.
7. Re-attach the cover of your computer, and reconnect the power
cord and all cables.
USB Header
2 / 7
White/D-
Braided Shield Ground
Error-Proof Pin
Black/Ground
Green/D+
5
10
4 / 9
3 / 8
Mother
Board
Signal
Red/Vcc
Pin#
1 / 6
IDE
Red Wire
Error-Proof Pin
USB
Red Wire