Filter
Top Products
· ANSI Fibre Channel: FC-PI-4, FC-FS-2,
FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA,
FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4,
SBC-3, FC-SP, FC-HBA and SMI-S v1.1
· PCI Express base spec 2.0
· PCI Express card electromechanical spec 2.0
· Fibre Channel class 2 and 3
· PHP hot plug-hot swap
· Single-channel (LPe12000) or
dual-channel (LPe12002)
· 8Gb/s, 4Gb/s or 2Gb/s FC Link speeds
automatically detected
· Integrated data buffer and code space memory
· Windows, Linux, NetWare, Solaris, VMware
· Additional support is available from OEMs
and partners
· PowerPC,
®
SPARC,
®
x86, x64 and
Intel
®
Itanium
®
64-bit processor family
· Data rates: 2.125, 4.25 and 8.5Gb/s
(auto-detected)
· Optics: Short wave lasers with LC type connector
· Cable: Operating at 8Gb/s
- 50/125µm (500MHz*km BW)-up to 50m
- 50/125µm (2000MHz*km BW)-up to 150m
· Short, low profile MD2 form factor card
· 167.64mm x 68.91mm (6.60" x 2.71")
· Standard bracket (low profile available)
· Volts: +3.3, +12
· Operating temperature: 0° to 55°C (32° to 131°F)
·
Storage temperature: -40° to 70°C (-40° to 158°F)
· Relative humidity: 5% to 95% non-condensing
· 23 degree C wet bulb
LightPulse
®
· Class 1 Laser Product per DHHS 21CFR (J)
and EN60825-1
· UL recognized to UL 60950-1
· CUR recognized to CSA22.2, No. 60950-1-03
· Baurt-certified to EN60950-1
· FCC Rules, Part 15, Class A
· ICES-003, Class A
· EMC Directive 2004/108/EEC (CE Mark)
- EN55022, Class A
- EN55024
· Australian EMC Framework (C-Tick Mark)
- AS/NZS CISPR22, Class A
· VCCI (Japan), Class A
· MIC (Korea), Class A
· BSMI (Taiwan), Class A
· EU RoHS Compliant (Directive 2002/95/EC)
· China RoHS Compliant
· LPe12000 - M8
- Single-channel, multi-mode optic interface
· LPe12002-M8
- Dual-channel, multi-mode optic interface
· Performance Features
- Doubling the maximum Fibre Channel link rate
from 4Gb/s to 8Gb/s and enhanced virtualization
capabilities help support IT “Green” initiatives
- Frame-level Multiplexing and out-of-order
frame reassembly increases link efficiency and
maximizes HBA performance.
· Data Protection Features
- End-to-end data protection with hardware parity,
CRC, ECC and other advanced error checking
and correcting algorithms ensure data is safe
from corruption.
This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or
registered trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes
no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This report is the property of Emulex and may not be duplicated
without permission from the Company.
09-170 · 8/08
3333 Susan Street, Costa Mesa, CA 92626 +1 714 662 5600
+44 (0) 118 977 2929 | +49 (0) 89 97007 177
+33 (0) 158 580 022 | +86 10 68499547
· Deployment and Management Features
- Universal Boot capability allows the appropriate
boot environment to be automatically selected
for any given hardware.
- Boot from SAN capability reduces system
management costs and increases uptime.
- Detailed real-time event logging and tracing
enables quick diagnosis of SAN problems.
- Beaconing feature flashes the HBA LEDs,
simplifying their identification within server
racks.
- Environmental monitoring feature helps to
optimize SAN availability.
· Emulex’s automated installation facilities and
extensive management capabilities speed HBA
deployment and device management, while
reducing administration costs and protecting IT
investment.
· Emulex LightPulse HBA management capabilities
enable secure, centralized discovery, monitoring,
reporting, and administration of Emulex HBAs
on local and remote hosts. Powerful automation
capabilities facilitate remote driver parameter,
firmware and boot code upgrades. Advanced
diagnostic features such as HBA beaconing and
HBA statistics help to optimize management and
network performance while the environmental
monitoring feature helps to maintain optimum
host to fabric connections. In addition to the
GUI interface, management functions can also
be performed via a scriptable Command Line
Interface
(CLI) as well as a web browser. With in-band and
out-of-band management capabilities, Emulex
provides data center administrators with the
greatest level of management flexibility.
· Automated installation and configuration of driver
and management tools simplifies deployment of
multiple HBAs for Windows environments. A single
installation of drivers and management utilities
eliminates multiple reboots and ensures that each
component is installed correctly and the HBA is
ready to use.
· Emulex’s management instrumentation complies
to Open Management Standards, such as SMI-S
and common HBA API support, which enables
seamless upward integration into enterprise
storage and server management solutions.