Encore electronic ENM232-6VIA Network Card User Manual


  Open as PDF
of 2
 
Feature Highlights
z Full-duplex 6CH DAC/2CH ADC
z Supports 96K/24 bit playback; 48K/16 bit recording
z PCI Rev. 2.2 compliant with bus mastering modes
z Supports the latest Dolby® Digital EX and DTS ES
5.1 CH DVD soundtrack playback
z DirectSound
TM
3 HW acceleration
z Zoomed Video Port Support
z ACPI compliant power down management
System Requirements
z Intel® Celeron 350MHz or AMD® K6II 500MHz or
better
z 128MB RAM or better
z CD-ROM Drive
z Windows® 98SE, Me, 2000, XP, Windows Vista™
z DirectX™ 8.1 or above required
Installing driver on Windows® 98SE/ME/2000/XP/
Windows Vista™
1. Locate an available PCI slot on your computer, and
insert the ENM232-6VIA 5.1 Channel Sound Card
into the slot. Fasten the card to the case using a screw;
2. Turn computer power on. Windows® will detect the
Sound Card as “PCI Multimedia Audio Device” or
“Multimedia Audio Controller” device. Click
“Cancel” button. We recommend to use the sound
card setup utility instead of Windows at this time.
3. Place the Setup disc CD into the CD-ROM drive.
Click the Start button on the taskbar and click Run.
Type “D:\autorun.exe”. (assuming D: is your
CDROM drive letter)
4. Follow the on-screen instructions to complete the
utility software installation
5. When installation is finished, restart your computer
 previous