Filter
Top Products
20
LAN Settings – Static IP
Click on the LAN Interface link on the navigation drop-down menu. This feature
allows you to configure the LAN interface using a static IP address or as a DHCP
server/client. This IP address is also used to access the web-based interface.
IP Address: Enter an IP address for this device.
Subnet Mask: Enter the subnet mask for this IP address.
Default Gateway: Enter the IP address of the default gateway.
DHCP: Since you have specified a static IP address, select Disabled from the drop-
down list.
802.1d: You may enable this option if you would like to use the spanning tree feature
for bridging. (optional)
Clone MAC Address: Specify a MAC address if you would like to use a different
MAC address on this device. (optional)
Click on the Apply Changes to save the changes.
Note: If you change the IP address here, you may need to adjust your PC’s network
settings to access the network again.