Filter
Top Products
62
WDS Bridge
Step1 Login to the web-based configuration interface with default IP 192.168.1.1
Step2 Select your country or region’s regulation.
Step3 Select Operation Mode to WDS Bridge from System Properties.
Step4 802.11a/b/g wireless network.
Step5 Select channel you would like to use.
Step6 Setup the authentication settings
Step7 Setup WDS Link Settings.
Step8 Specify the AP’s MAC address you would like to connect with.
Step9 Press Apply to process all the configurations.
Auction: Each WDS bridge’s device must use the same Subnet, Wireless Mode, Wireless Channel, and Security Setting.
9.4 Client Router
In the Client Router Mode, the EOC5611P has DHCP Server build inside that allows many LANs
automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and
connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode.