Overview
1-2 Introduction
B3G124-24P Stackable Switch
TheB3G124‐24P(Figure 1‐1)hasseveraltypesoffrontpanelportconnections,which
include:
•Twenty‐fourRJ45ports(10/100/1000Mbps,1000BASE‐Tcopperports)thatalso
supportPoEforconnectionstoIEEE802.3afcompliantPDs(powereddevices).
•FourSFPslotsthatprovideyouwiththeoptionofinstallingSmallForm
Pluggable
(SFP)Mini‐GBICsfor1000BASE‐SX/LXfiber‐opticconnectionsand1000BASE‐T
copperconnections.
•Rearpanelconnectorsforhigh‐speedconnectionsinastackconfiguration.
•RearpanelRedundantPowerSupplyconnectorusedtoconnecttoaSecureStack
PoE‐compliantRedundantPowerSupply(C2RPS‐POE).Theswitchconnectstothe
SecureStack
C2RPS‐POEusingaSecureStackC2RPS‐POEcable.
The10/100/1000 Mbps fixedfrontpanelportscanoperateineitherhalf‐duplexorfull‐
duplexmode,asdeterminedbyAuto‐Negotiation.
Note: The Mini-GBIC ports cannot be active simultaneously with their corresponding
10/100/1000BASE-T ports. For example, if SFP port 24 establishes a link first on the
B3G124-24P, the 10/100/1000BASE-T built-in RJ45 port 24 is not available and
vice-versa.
Caution: The B3G124-24P and B3G124-48P are PoE-compliant devices. Do not connect
a SecureStack Redundant Power System (C2RPS-SYS) to the power connector.
Otherwise, damage to the device may result.
Precaución: Los dispositivos B3G124-24P y B3G124-48P cumplen con el estándar PoE
(power over ethernet). No conecte una fuente de poder redundante (RPS) SecureStack
(C2RPS-SYS) al cable de corriente. De lo contrario, el dispositivo puede dañarse.