Enterasys Networks VH-4802 Switch User Manual


 
12 Product Overview VH-4802
Factory Defaults
Table 1-4 lists the default settings for switch configuration parameters.
Each parameter can be changed via the console menus or Telnet.
Table 1-4. Factory Default Settings
Parameter Default Value
Multicast Filtering
GMRP Disabled
IGMP Multicast Filtering Disabled
Port Configuration
Flow Control Disabled
Speed and Duplex Auto
Admin Enabled
Broadcast Storm Control Enabled - 500 pps
Port Priority
Default Ingress User Priority 0
Spanning Tree Algorithm
Active Aging Time 300
Bridge Priority 32768
Forward Delay 15
Hello Time 2
Max Age 20
Path Cost 4 - 1000Mbps ports
19 - 100Mbps ports
100 - 10Mbps ports
Port Priority 128
Spanning Tree Protocol Enabled
System Configuration
Management VLAN All
BootP Enable Disabled
Password <none>
Screen Timeout 10 min
Send Authentication Fail Traps Enabled
SNMP Community Name public, private
Terminal Baud Rate Auto
User Names admin, guest
ELS100-48tx2m.book Page 12 Thursday, November 16, 2000 4:59 PM