Filter
Top Products
FeaturesEP-3VWM
Page 2-1
Section 2
FEATURES
EP-3VWM Features:
EP-3VWM is based on the Socket 370 Processors including PPGA & FC-
PGA operating at 300 ~ 800MHz.
Designed with VIA VT8601 AGPset.
Supports up to 512MB of DRAM (minimum of 32 MB) on board (please
see Section 3-2).
Supports (3) 32 bit PCI slots, (1) 16 bit ISA slot, (1) AMR slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33/66 devices. The EP-3VWM supports (3)
PCI Bus Master slots and a jumperless PCI INT# control scheme which
reduces configuration confusion when plugging in PCI card(s).
Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP,
ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese Floppy 3 mode is also supported
Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com/
please visit our Technical Support section for the latest updates).
EP-3VWM utilizes a Lithium battery which provides environmental
protection and longer battery life.
Supports the (4) Universal Serial Bus (USB) Ports, 2 ports as standard,
another 2 ports as option. For USB devices such as keyboard, mouse and
speakers etc.