Filter
Top Products
R4C1320 Quick Reference
Rev.D
A5 size QUICK.FM
6/18/01 Pass 0
R
Proof Sign-off:
ABE S.Takahashi K.Yoda_______
M.Miyazaki _______
ABE G.Kok _______
22
2222
22
Image Optimum There is insufficient memory to
print the page at the specified
print quality. The printer
automatically lowers the print
quality so that it can continue
printing. If the quality of the
printout is not acceptable, try
simplifying the page by limiting
the number of graphics or
reducing the number and size of
fonts.
Press the Continue button or
reset the printer to clear the
message.
Turn the Image Optimum setting
off in the SelecType Config
Menu if you do not want the
printer to automatically lower
the print quality to continue
printing.
You may need to increase the
amount of printer memory to be
able to print at the desired print
quality for your document.
Messages Description
Install Fuser There is no fuser unit installed, or
the fuser unit is not installed
properly. Install the fuser unit if it
is not installed.
If a fuser unit is already installed,
open the printer’s top cover,
remove the fuser oil roll, and
then remove the fuser unit.
Reinsert the fuser unit, making
sure it fits properly into the slot.
Reinstall the fuser oil roll and
close the top cover. The error
automatically clears itself if the
fuser unit is properly installed.
Install Oil
Roll
The fuser oil roll is not installed.
Install a fuser oil roll into the
printer.
Install
Photocondctr
The photoconductor unit is not
installed, or is installed
incorrectly. Install the
photoconductor unit if it is not
installed.
If the photoconductor unit is
already installed, try removing it
and then reinstalling it into the
printer.
Insert Transfer
Belt
There is no transfer belt unit
installed in the printer. Install a
transfer belt unit into the printer.
Messages D escription