Filter
Top Products
7
6. Make sure the Local printer attached to this computer button is
selected and
Automatically detect and install my Plug and Play
printer is unchecked. Then click Next.
7. Click
Create a new port, select Standard TCP/IP Port, and click
Next.
8. When you see the Add Standard TCP/IP Print Port Wizard screen,
click
Next.
9. Enter the IP address for the Macintosh that is running the ColorBurst
RIP server (located under
System Preferences > Network settings),
then click
Next.
Note: The IP address on the Macintosh ColorBurst server must be static.
10. Select Custom, then click the Settings button.
11. Under Protocol, select
LPR.
12. For the Queue Name, enter the exact ColorBurst Print Server Name
that appears in the Macintosh RIP server’s ColorBurst RIP Preferences
window.
The name is case-sensitive; the default name is
ColorBurst_RIP.
13. Make sure the
LPR Byte Counting Enabled checkbox is unchecked.
14. Click
OK.
15. Click
Next.
Colorburst.fm Page 7 Wednesday, September 7, 2005 4:22 PM