Epson 9900 All in One Printer User Manual


 
195
Solving Problems | 195
Solving Miscellaneous Printing Problems
If your printouts are not what you expected, try the suggestions below:
Nothing prints. Turn off the printer and computer. Make sure the interface cable is securely
plugged in. Then restart the printer and computer.
Make sure the interface cable meets the requirements; see page 13 or 14.
The printer port setting doesn’t match the printer connection port
(Windows).
Windows Vista: Click > Control Panel > Hardware and Sound >
Printers. Right-click the icon for your printer, then select Properties. Click
the Ports tab and make sure your printer port is selected.
Windows XP: Click Start > Control Panel > Printers and Other Hardware
> Printers and Faxes. Right-click the icon for your printer, then select
Properties. Click the Ports tab and make sure your printer port is selected.
Download and install the latest driver for Macintosh or Windows from the
Epson website at www.proimaging.epson.com.
Problem Solution
Problem Solution
Your print has incorrect or
garbled characters.
Make sure your software is installed correctly and the printer is selected.
Clear any stalled print jobs.
Turn off the printer and computer. Make sure the interface cable is securely
plugged in at both ends.
Your print has incorrect
margins.
Check the page size or paper size settings in your application. Make sure
they are within the printer’s printable area.
Make sure the Paper Size and Borderless settings in your printer software
are correct for the paper you’re using.
Paper is loaded incorrectly. Follow the instructions beginning on page 57 to
reload the paper. Make sure PAPER SKEW CHECK is ON in the control panel
menu.
The ROLL PAPER MARGIN setting on the PRINTER SETUP menu is
incorrect. See page 227 for more information.
Your image is inverted. Turn off the Flip Horizontal or Mirror Image setting in your printer software.
See page 95 or page 111 (Mac OS X) or page 137 (Windows) for
instructions.