Filter
Top Products
3.
Hold the base so the hooks are turned down and position
the base next to the bottom of the monitor.
4.
Insert the hooks into the slots on the monitor.
5.
Slide the base toward the front of the monitor until the latch
clicks into the locked position. Then turn the monitor over
so it rests on the base.
Note
Always remove the tilt and swivel base before packing and
transporting the monitor. To remove the base, disconnect
the power cord from the electrical outlet and disconnect the
cables from the back of the monitor. Carefully set the
monitor face down on a padded surface. While pressing the
latch on the bottom of the monitor, remove the base by
lifting the hooks out of the slots.
6
14
”
Super VGA Color Monitor