Filter
Top Products
Put the CISS on the right side
of the printer. In the meantime Remove from the air hole as above Place the air filters on
place all the tubes at correct picture shown.
position.
2) Second step: Remove out the original cartridges
press the ink cartridge replace button to make the small cart button Draw out the electrical
move to the position which Source
ready to change the ink
cartridges
3) The third step: Place the Cartridges in
Remove out the original cartridges then put down the inner at last cover it suitably
cartridges in as show in
the picture
(4)、The fourth step : Fix up the support arm
Rip the label Stick the Support arm at 7.5cm distance Rip the label
from the inner side of the printer, Rip the on the balance arm