Filter
Top Products
Important Setup Information
Network Connection
(Wireless or Wired)
1. If you’re connecting to a network, use the
Ethernet cable that came with your product.
IMPORTANT:
Connect the cable for wireless or wired
networks. For a wireless connection, you’ll
remove the cable later.
2. Set up your product using the Start Here sheet.
DO NOT follow the software installation steps
under “USB connection.”
3. Install your software using the Network
Installation Guide.
For a variety of network setup information, go to:
www.epson.com/support/wireless
Direct Connection (USB)
1. If you are NOT installing your product on a
network, connect it using a USB cable (not
included).
You can purchase a USB cable at most
electronics stores.
2. Set up your product and install your software as
described on the Start Here sheet.
CPD-26557
Printed in/Pays d’impression : Indonesia
Ethernet network
cable (included)
USB cable
(not included)