Filter
Top Products
Epson AcuLaser CX11N/CX11NF
8/05 Epson AcuLaser CX11N/CX11NF - 9
Note:
Do not turn off the power or press any other button while faxing.
If no button is pressed for more than 3 minutes, any changes
made are canceled and the mode returns to the Print mode.
2. Place your original either on the document table or in the
Auto Document Feeder. For details, see page 6.
3. Enter the recipient’s fax number directly from the numeric
keypad on the control panel. Keep these points in mind:
❏ You can enter a maximum of 50 characters.
❏ To re-enter the last number used, press the
Redial
button.
❏ If you press the
Pause button while entering the
recipient number, a “-” is displayed for the pause.
❏ If you enter an incorrect number, press the
Reset
button to delete a character to the left of the cursor.
Pressing the l or r button moves the cursor left or
right.
❏ You can also enter a fax number using the
One Touch
Dial
button or the Speed Dial button.
4. Specify any settings if necessary. You can specify the
Document Size, Density, Image Quality, Polling reception,
and Overseas transmission mode settings.
5. Press the x
B&W Start button (for a black and white fax)
or x
Color Start button (for a color fax) to start the
transmission.
Note:
When the recipient’s fax machine supports only black-and-white
fax, a color fax is received as a black-and-white fax even if you
press the x Color Start button.
Receiving a Fax
There are four modes for receiving faxes. The default setting is
Fax only.
To change Incoming Mode settings, follow these steps.
1. Press the
Setup button.
The Setup light turns on and the Setup menu appears in the
LCD screen.
2. Press the d button twice to select
Fax Settings, then press
the r button.
3. Press the d button twice to select
Reception Settings,
then press the r button.
4. Press the d button twice to select
Incoming Mode, then
press the r button.
The Reception Settings menu appears.
5. Press the u or d button to select the reception mode you
want, then press the r button.
6. To exit the settings, press the l button several times or press
one of the mode buttons.
Checking Toner and Photoconductor
Levels
Epson Status Monitor 3 lets you monitor printing and
displays information about your paper and toner status.
Windows
Note:
Windows XP users
❏ Shared Windows XP LPR connections and shared Windows
XP Standard TCP/IP connections with Windows clients do not
support the Job Management function.
❏ EPSON Status Monitor 3 is not available when printing from a
Remote Desktop connection.
Item Description
Auto switching The call is received by the attached phone and the
CX11NF automatically answers after the phone
rings for a certain duration specified by the
Attached Phone Timeout setting.
Fax only The CX11NF automatically answers and receives
the fax.
Phone only The call is received by the attached phone. Fax
reception is not performed.
TAM When an attached phone detects a fax/phone signal
while answering an incoming call, the CX11NF
automatically receives the fax.