Filter
Top Products
If the indicator light show flashing when printing .it tell you that you need to change the cartridges, the
please power off the printer for about 1 minutes and turn on again, this time it will show full on the computer,
then it can work in good condition.
5、Refill Ink
Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the
above picture shown, please use refill kits to fill ink into Reservoir bottles. Carefully pull out
the rubber plugs from the refill holes.(there is possibility of ink spattering. Be careful!) Refill
ink according to the color in short supply. Then put the rubber back. (Please keep the printer
and the reservoir at the same horizontal line during the process of refilling ink.)
6. Assemble the cartridge cover
First place the left side of cartridge cover down correctly, second, put the other side of the cartridge cover at
the above of the cart and adjust the position of the connection
Then press the right side of the cartridge cover to make it down to the suitable position, now it is ok to work.
7、Attention for maintenance:
Take out the CISS including the inner cartridges and other components. Then