Filter
Top Products
When WEP is selected
You can set the following items.
Sub Menu Function
WEP Encryption
You can set the encryption for WEP encryption.
128Bit: Uses 128 (104) bit encoding
64Bit: Uses 64 (40) bit encoding
Format
You can set the input method for the WEP encryption key.
ASCII: Input text.
HEX: Input in HEX (hexadecimal).
Key ID
Selects the WEP encryption ID key.
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the
network in which the projector participates. The type of character and the number that can be entered differ according to the WEP Encryption and
Format settings.
If the number of characters you enter is shorter than the required character length, or if the number of characters you enter is longer than the required
character length, it does not connect.
128Bit - ASCII: Single-byte alphanumerics, 13 characters.
64Bit - ASCII: Single-byte alphanumerics, 5 characters.
128Bit - HEX: 0 to 9 and A to F, 26 characters
64Bit - HEX: 0 to 9 and A to F, 10 characters
Authentication Type
Set the WEP authentication type.
Open: Uses open system authentication.
Shared: Uses shared key authentication.
List of Functions
70