Filter
Top Products
Control Panel
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
C
[Enter] button
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Display
Position.
Name Function
D
[w][v] buttons
• Performs vertical keystone correction.
s "Correcting keystone distortion in vertical
directions" p.36
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.74
s "Using the Help" p.94
E
[a][b] button
[a] Decreases the volume.
[b] Increases the volume.
s
"Adjusting the Volume" p.40
F
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.94
G
[Esc] button
• Stops the current function.
• If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu" p.74
H
[<][>] buttons
• Performs horizontal keystone correction.
s "Correcting keystone distortion in horizontal
directions" p.37
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.74
s "Using the Help" p.94
I
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.74
Part Names and Functions
13