Filter
Top Products
List of Functions
47
Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power
comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode: When set to "On", this automatically stops projection when no image signal is being input and no operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to "On", you can set the time before the projector automatically turns off within a range of 1 to 30
minutes.
High Altitude Mode: Set to "On" when using the projector above an altitude of 1500 m.
BNC Sync Termination: Set the termination for the signal from the BNC input port. This should usually be set to "Off". Set to "On" when
analog (75Ω) termination such as for switchers is necessary.
Standby mode You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
You can use SNMP
g to monitor and control the status of the projector over the network, or by using the "EMP Monitor"
software
supplied with
this product.
Projector ID Set the ID within a range of "1" to "9". "Off" indicates that no ID is set. s p.30
Multi-screen You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. s p.32
Adjustment Level: You can adjust from black to white in five stages called levels 1 to 5, and in each of these 5 levels you can adjust "Brightness
Correct." and "Color Correct".
Brightness Correct.: Corrects the difference in the brightness of each product.
Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the color of each product.
Language You can set the language for message displays.
Reset You can reset "Display
*1
" and "Operation
*2
" from the "Extended" menu to their default settings.
To return all menu items to their default settings, see s p.64
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". s p.34
*2 Except for "High Altitude Mode".
Sub Menu Function