Filter
Top Products
Name Function
I
[Page] buttons
[
[
][
]
]
These buttons can be used to page up and down when
projecting an image from a computer that is connected to
the projector through the network. These buttons can be
used to switch the screen when projecting with PC Free.
(EB-G5950/G5650W only)
These buttons can be used to page up and down when
using the optional wireless mouse receiver.
J
[A/V Mute] button
Turns the video and audio on or off. (EB-G5950/G5900/
G5650W/G5600)
Turns the video on or off. (EB-G5800/G5500) s p.38
K
[Split] button
Press this button to split the screen in two and project two
images simultaneously. s p.34
This button does not function when using EB-G5800/
G5500.
L
[Auto] button
If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
M
[Aspect] button
The
Aspect Ratio
g
changes each time the button is
pressed. s p.29
N
[ID] button
Press to set the remote control ID. s p.43
O
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.85
P
Remote port
Connects the optional remote control cable set and
outputs signals from the remote control. (EB-G5950/
G5900/G5650W/G5600 only)
When the remote control cable is plugged into this remote
port, the remote receiver is disabled.
Name Function
Q
[Volume] button
[
][ ]
[
] Decreases the volume. [ ] Increases the volume.
s Quick Start Guide
This button does not function when using EB-G5800/
G5500.
Caution
Do not start when the volume is set too high.
Loud sounds may cause loss of hearing. Always low-
er the volume before turning off the projector. Grad-
ually increase the volume after turning on the pro-
jector.
R
[Num] button
Use this button to enter passwords, IP Address from the
Network, and so on.
S
Numeric buttons
Use this button to enter passwords, remote control ID
settings, IP Address from the Network, and so on.
T
[Color Mode] button
Each time the button is pressed, the Color Mode changes.
s p.33
U
[Freeze] button
Images are paused or unpaused. s p.38
V
[E-Zoom] buttons
[z][x]
The [z] button enlarges the image without changing the
projection size.
The [x] button reduces the parts of images that have been
enlarged using the [z] button. s p.40
W
[Pointer] button
Press to activate the on screen pointer. s p.39
X
[Esc] button
Stops the current function. If pressed when the
configuration menu is displayed, it moves to the previous
menu level. s p.54
Acts as a mouse's right button when using the optional
wireless mouse receiver.
Part Names and Functions
17