Filter
Top Products
Other Problems
No sound can be heard or the sound is faint
Check Remedy
Check that the audio/video cable is securely attached to both the
projector and audio source.
Disconnect the cable from the Audio port, and then reconnect the cable.
Is the volume for the projector or the connected equipment set to the
minimum?
Adjust the volume so that sound can be heard.
s Settings - Volume p.105
s
"Adjusting the Volume" p.53
Is the Mic Input Level set at the maximum? Lower the Mic Input Level.
s Settings - Mic Input Level p.105
Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.71
Is the audio cable's specification "No resistance"? When using a commercially available audio cable, make sure it is labeled "No resistance".
Is it connected with an HDMI cable? If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Is Output audio from the projector selected?
(Only when projecting in USB Display, when projecting one screen
in EasyMP Network Projection, or one screen in EasyMP Multi PC
Projection.)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Output audio from the projector.
When projecting in EasyMP Network Projection or EasyMP Multi PC Projection: In the software you are using, select
Output audio from the projector from the Audio Output tab in Set options.
There is noise in the audio (when projecting EasyMP Network Projection, EasyMP MultiPC Projection, USB Display, or Quick Wireless
Connection)
Check Remedy
Is the volume for the computer set to the minimum while the
projector is set to the maximum?
If the volume for the computer is set to the minimum while the projector is set to the maximum, the noise may be mixed.
Turn up the computer's volume and turn down the projector's volume.
Problem Solving
142