Filter
Top Products
Setting the Projector ID
Procedure
A
During projection, press the [Menu] button and select
Extended - "Projector ID" from the configuration menu.
s
"Using the Configuration Menu"
Using the Remote Control Using the Control panel
B
Choose the ID you want to set and press the [Enter] button.
C
Press the [Menu] button to close the configuration menu.
Checking the Projector ID
Use the following procedure to check the projector ID.
Procedure
A
Set the remote control ID switch to On.
B
During projection, while holding the [ID] button, press the
[Help] button.
Remote Control
When you press the buttons, the current Projector ID is displayed
on the projection screen. It disappears in about three seconds.
Limitation of the Number of the Target Projectors when Using Multiple Projectors
33