Filter
Top Products
37Menu Settings
When Auto is selected, the projector automatically
identifies the incoming video signal. If you select NTSC,
PAL, or SECAM, the projector accepts only the selected
video signal. Normally you should not change the default
setting.
Tint Adjusts the red/green color balance. Increase tint to
(NTSC only) make the image more green; decrease to make it more
red.
Display menu
Horizontal Moves the image left or right. To move the image to the
right, increase the setting; to move it to the left, decrease
the setting.
Vertical Moves the image up or down. To move the image up,
increase the setting; to move it down, decrease the setting.
Menu Switches the position of the menu between the top and
bottom of the projector screen.