Filter
Top Products
If images do not appear ...
If you have other problems ...
If a laptop computer or a computer with a
LCD screen has been connected to the
projector, you may need to change the
output destination for video signals
depending on the computer keys ( or
) or the computer's settings. The
output destination can normally be
changed by holding down the computer's
key and pressing one of the
Function keys.
Once the source has been changed, after
a short wait the projector will start
projecting. If the output has been
changed to external output, only the
external output should be used.
For details, refer to the documentation
provided with your computer.
Change the input
signal.
Refer to the online
Help information.
After restarting the computer,
change the Control Panel
monitor and sound settings
so that Mirroring is active.
* Refer to Troubleshooting.
Projector Remote Control
Projector Remote Control
Tip
Press , and
then follow the
instructions.
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
Projecting