Epson EMP-S1 Projector User Manual


 
9
EMP-S1 User’s GuideBefore Using the Projector > Remote Control
f Before using the Remote Control
Remove the insulating tape.
f Using the Remote Control
Operate the remote control by aiming it at the remote control infrared
receiver on the projector.
f Operating range
Operable distance: Max. approx. 6m (20ft.)
(May be shorter depending on conditions.)
Operable angle: approx. 30° horizontally, 15° vertically
* The remote control infrared receiver on the back of the projector can also
be used under the same conditions.
f Storage
When not using the remote control, please store it in the remote control
holder on the projector.
A
Open the remote control holder.
B
Place the remote control in the remote control holder.
C
Close the remote control holder until it clicks into
place.
p
If direct sunlight or fluorescent lighting hits the remote control
infrared receiver, you may not be able to use the remote control.
remote control
infrared receiver
remote control
infrared receiver
15°
15°
30°
30°
Max
6m