Filter
Top Products
7
Part Names and Functions
Remote control
• Remote control light-
emitting area p.13
Outputs remote control signals.
• On/Off buttons p.14
Turns the projector power on/off.
•
Indicator
Illuminates when remote control
signals are being output.
• Memory button p.24
Retrieves stored memories.
• Menu button
p.34
Displays the full-screen
configuration menus.
• Select/Line menu button
p.18, 24
,
34
Displays the line menu.
When viewing a menu, press this
button to select the menu item and
proceed to the next display.
•
button
p.18, 20
,
22, 24
,
34
Press to select menu items and
adjustment values and to adjust the
zoom and focus.
• Gamma button p.20
Adjusts the gamma values.
• Color Temp. button p.20
Adjusts the absolute colour
temperature.
• Contrast button p.28
Adjusts contrast
.
• S.Tone (Skin Tone)
button p.20
Adjusts the skin tones of people
who appear in the images.
• Blank button
The projected images switch off
and on each time this button is
pressed.
• (Illumination) button
All buttons on the remote control illuminate when this button is pressed.
The button illumination switches off automatically after about 10 seconds
have passed.
• Color Mode button p.18
Selects the colour mode.
• Aspect
button p.18
Selects the aspect.
• Esc button
p.18
,
20
,
24
,
34
Pressing [Esc] while viewing a
menu displays the previous menu.
• HDMI button
• InputB button
• S-Video button
• Video button
Changes to the image from the
projector's selected port.
• D4/scart button
• InputA button
Changes to the image from the
projector's selected port.
You can select the input signal to
match the equipment that is
connected to the selected port.
Source buttons p.15
• Pattern button p.17
Selects a test pattern.