Filter
Top Products
Connecting to a Computer
■ ■ ■ ■ ■
■
15
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio 1 jack on the projector. (Use the Audio
2 jack if you are connecting a second computer.)
2. Connect the other end of the audio cable to your laptop.
Connecting to a Desktop Macintosh
To connect the projector to your desktop Macintosh, you
need to:
• Connect the computer cable and computer monitor cable
• Connect the mouse and/or serial cable (if you want to use
the remote control as a mouse or use the ELP Link IV
software)
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦
Note:
Macintosh configurations vary. See your computer
manual for the location of the ports needed to connect your
projector.
Audio 1 jack
audio cable