Filter
Top Products
Maintaining the Projector 61
Cleaning the Air Filters and Vents
Clean the air filters and air intake vents after every 100 hours of use. If
they are not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector.
Follow these steps:
1. Turn off the projector. Wait for the
Power light to stop flashing,
then unplug the power cord.
2. Turn the projector upside down.
3. To clean the intake vents, use a small vacuum cleaner designed for
computers and other office equipment. If you don’t have one,
gently clean the vents with a soft brush (such as an artist’s
paintbrush).
4. If the dirt is difficult to remove or the filter is broken, replace the
filter as described on page 64. Contact your dealer or call Epson at
(800) 873-7766 in the United States to obtain new ones. In
Canada, please call (800) 463-7766 for dealer referral.
note
To order replacement air
filters, request part number
V13H134A08. See page 11
for ordering information.
Quebec User's Guide.book Page 61 Friday, September 3, 2004 2:46 PM