Filter
Top Products
continuecontinue
6
Install Software and
Connect to Your Computer
The software works with Windows
®
98SE, Me, 2000, and XP, and Macintosh
®
OS 9.2.x and 10.2.x to 10.3.x. Follow the steps below (for Windows), or the
steps in the next column (for Macintosh).
W i n d o w s
1 Make sure the RX620 is not
connected to your computer,
then turn on your computer.
Note: If you see several New
Hardware Wizard screens, click
Cancel for each of these screens and
d i s c o n n e c t your RX620. You can’t
install your software that way.
2 Insert your RX620 software CD-ROM
in your CD-ROM or DVD drive.
Note: If you’re using Windows XP and you see a message asking what
to do with your CD, click Cancel.
3 When you see this screen,
then click Install.
Note: If you don’t see this screen,
do the following:
Windows XP: click Start >
My Computer. Then double-click
the Epson CD-ROM icon.
Windows 98/Me/2000: double-click My Computer.
Then double-click theEpson CD-ROM icon.
4 Read the license agreement, then click Agree. Several messages
display on your screen.
5 When you see this screen, plug the flat
end of the USB cable into any available
USB port on your computer.
6 Click Next to continue the installation.
Note: It will take several minutes to install the software. Click Next or
Finish, as prompted. Don’t cancel the installation.
7 When the installation is complete, print a test page, if desired. Then
click Next to install optional software.
8 Follow the instructions on the screen to install the software. When done,
click Exit.
9 When you see the Product Registration screen, register your RX620 as
instructed, then remove the CD-ROM and restart your computer.
Now you’re ready to copy, scan, and print. See the Quick Guide or your
on-screen Reference Guide for instructions.
M a c i n t o s h
1 Insert your RX620 software CD-ROM into your CD-ROM or DVD drive.
2 Double-click the Epson
CD-ROM icon, if necessary. Then
double-click the Epson installer
icon. You see this screen:
3 Click Install.
4 Read the license agreement, then
click Agree.
Note: If you’re installing on Macintosh OS X, enter your
administrator name and password, if necessary.
5 Macintosh OS X: Continue with the following steps.
Macintosh OS 9: Follow any on-screen instructions,
then continue with step 9.
6 Click Install at the EPSON Scan
Installer screen to install the
scanner portion of your software.
7 When the software finishes
installing, click Quit.
8 Follow the on-screen instructions to install additional software.
Note: Click Quit when each part finishes installing.
9 When installation is complete, you see the Additional Software screen.
Follow the instructions on the screen to install the software. When
done, click Exit.
1 0 Close any open screens, remove the CD-ROM, and restart your
Macintosh.
1 1 Plug the flat end of the USB cable into any available USB port on your
Macintosh.
Follow the instructions below to add the RX620 to the Print Center or Printer
Setup Utility (for OS X) or the Chooser (for OS 9).
Selecting the RX620 for Mac
®
OS X
1 Open the OS X Applications folder, then open the Utilities folder and
start Print Center or the Printer Setup Utility.
If you see this screen, click Add.
2 On the Printer List screen, click the
Add button.
3 On the next screen, select EPSON USB from
the pull-down menu.
4 Click Stylus Photo RX620.
Note: If the RX620 doesn’t appear, make
sure it is turned on and securely connected
to your Macintosh.
5 Click the Add button. You see the Stylus Photo RX620 in the
Printer List.
6 Quit Print Center or the Printer Setup Utility. Now you’re ready to copy,
scan, and print. See the Quick Guide or your on-screen Reference
Guide for instructions.
If you are having a problem with your RX620, check the message on the
control panel. Try turning the RX620 off and then back on to clear the error.
If your problem is listed here, try these suggestions. For more information,
see your Quick Guide, software Help, or on-screen Reference Guide.
The Found New Hardware Click Cancel and disconnect the RX620.
Wizard appears on Install the software as described on this
your screen. page.
You see an error message Make sure your RX620 is connected to your
when you try to print computer, plugged into a power source, and
or scan. turned on.
The RX620 doesn’t work. Make sure you have unlocked the scanner
and print head, as described in section 2.
Turn the RX620 off and then on again.
Make sure the ink cartridges are pushed all
the way down.
Make sure your RX620 software is installed
correctly.
Any Problems?
Epson and Epson Stylus are registered trademarks and EPSON Smart Panel is a trademark
of Seiko Epson Corporation. Epson Store and SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2004 Epson America, Inc. 9/04
For the best prints and copies, use genuine Epson ink and paper. You can
buy them from your local retailer or from the Epson Store
SM
at (800) 873-7766,
or visit www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
T048120 T048220 T048320 T048420
Black Ink Cyan Ink Magenta Ink Yellow Ink
Cartridge Cartridge Cartridge Cartridge
T048520 T048620
Light Cyan Light Magenta
Ink Cartridge Ink Cartridge
Note: A color ink multipack is also available (T048920).
Premium Glossy Photo Paper
Heavyweight paper with a high gloss finish that lets
you create borderless photos with no perforated
edges. Available in 4 x 6, 5 x 7, 8 x 10, and Letter
sizes.
Matte Paper Heavyweight
Perfect for high-quality photo reprints and
enlargements.
PremierArt™ Matte Scrapbook Photo Paper
for Epson
Ideal for printing beautiful-quality matte photos and
scrapbook-safe elements.
Semigloss Scrapbook Photo Paper
Perfect for printing satin-finish photos that stand
out against the traditional matte background of your
scrapbook pages.
Need Ink and Paper?
Selecting the RX620 for Mac OS 9
1 Open the Chooser from the Apple
®
menu.
2 Select SP RX620 Series, then
select your USB port and turn on
background printing.
3 Close the Chooser. Now you’re
ready to copy, scan, and print. See
the Quick Guide or your on-screen
Reference Guide for instructions.
Here’s where to look for answers:
Epson Stylus Photo RX620 Quick Guide
Includes instructions on copying, printing, and scanning
without a computer.
On-screen Reference Guide
Explains how to use your RX620 with a computer. Double-click the
Reference Guide icon on your desktop to view the guide.
On-screen help for EPSON Smart Panel™, ArcSoft PhotoImpression™,
and EPSON Scan
Click the Help button or question mark that appears on the screen
when you’re using any of these programs.
Epson Technical Support (Stylus Photo RX620 and EPSON Scan)
• World Wide Web
http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your Epson SoundAdvice
SM
Express Code is 70595.
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM,
Pacific Time, Monday through Friday. Toll or long distance charges
may apply.
Software Technical Support
Software Telephone and Fax Internet and E-mail
EPSON Smart (510) 445-8616 www.newsoftinc.com
Panel Fax: (510) 445-8601 tech@newsoftinc.com
ArcSoft (510) 440-9901 www.arcsoft.com/techmain
PhotoImpression 8:30 AM to 5:30 PM, support@arcsoft.com
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
Any Questions?
CPD18568_Patt_SH_E.qxd 9/3/04 3:49 PM Page 2