Filter
Top Products
16
Error Status
There are three possible error types: automatically recoverable errors, recoverable errors, and
unrecoverable errors.
Automatically Recoverable Errors
Printing is no longer possible when automatically recoverable errors occur. They can be
recovered easily, as described below.
Recoverable Errors
Printing is no longer possible when recoverable errors occur. They can be recovered easi ly by
turning the power on again or sending an error recovery command from the driver after
eliminating the cause of the error.
Error Error description
Error LED flash code
Recovery measure
Roll paper
cover open
error
The roll paper cover
was opened during
printing.
Recovers automatically
when the roll paper
cover is closed.
Print head
temperature
error
A high temperature
outside the head drive
operating range was
detected.
Recovers automatically
when the print head
cools.
Error Error description
Error LED flash code
Recovery measure
Autocutter error Autocutter does not
work correctly.
Remove the jammed
paper or foreign matter
in the printer, close the
roll paper cover, send
the error recover
command, or turn the
power on to recover.
The error recovery command is valid only if a recoverable error (excluding automatically
recoverable errors) occurs.
Approx.
160 ms
Approx.
160 ms
Approx.2.56 s