Filter
Top Products
6 TM-U200 Series User’s Manual
English
2. Turn on the printer, open the printer cover, and insert the
paper roll as shown in illustration
5
below. Note the direction
the paper comes off the roll, which is shown in illustration
6
below.
3. Open the autocutter by pulling the tab up and toward you as
shown in illustration
7
.
4. Hold both edges of the paper and insert it straight into the
paper slot, as shown in illustration
8
. The printer feeds the
paper automatically.
5. If you are not using a take-up spool, tear off the paper, close the
autocutter, and close the printer cover. You can then skip steps
6 through 8.
6
4
5
78