Epson EX3220 Projector User Manual


 
Power light Status light Lamp light Temp light Status and solution
Off Flashing blue Off Orange Projector has overheated and
turned off. Leave it turned off to
cool down. Once the Temp and
Status lights turn off and the power
light turns blue (after about five
minutes), try the suggestions
below:
Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
Clean or replace the air filter.
If operating the projector at high
altitude, turn on High Altitude
Mode.
If the problem persists, unplug
the projector and contact Epson
for help.
Off Flashing blue Orange Off Lamp has a problem.
Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace the
lamp as necessary.
Clean or replace the air filter.
If operating the projector at high
altitude, turn on High Altitude
Mode.
If the problem persists, unplug
the projector and contact Epson
for help.
Flashing blue Light status Flashing Light status Replace the lamp soon to avoid
varies orange varies damage. Do not continue using the
projector.
132