Filter
Top Products
7
3. Make sure the correct interface is selected for your printer
(
Parallel, USB, TCP/IP, or Serial) and click Update.
If you did not select the correct interface, or if the printer is not
turned on or connected properly, you see one of these messages:
Make sure the printer is connected properly and turned on. Then
click
Yes or OK to update the printer.
Note:
You may need to click the
Update button again (step 2).
You see this window:
4. Click
OK. The control panel lights flash and the print head
moves to show that the settings have been changed.
The new settings remain in effect until you select another
configuration file or restore the default settings.