Epson G6570WU Projector Accessories User Manual


 
Power light Lamp Temp light Filter light Status and solution
light
Flashing red Off Flashing Off Projector is too hot.
orange
Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
Clean or replace the air filter.
Make sure the environmental temperature
is not too hot.
Red Off Red Off Projector has overheated and turned off.
Leave it turned off to cool down for five
minutes.
Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
Clean or replace the air filter.
If operating the projector at high altitude,
turn on High Altitude Mode.
If the problem persists, unplug the
projector and contact Epson for help.
Red Flashing Off Off Lamp has a problem.
red
Check to see if the lamp is burned out,
broken, or installed incorrectly. Reseat or
replace the lamp as necessary.
Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
If operating the projector at high altitude,
turn on High Altitude Mode.
If the problem persists, unplug the
projector and contact Epson for help.
On Off Off Flashing It is time to clean the air filter.
green
215