Filter
Top Products
Making Detailed Adjustments 45
■ Setup Level
Note: This setting can be used only when an NTSC signal is being input through the Video port,
or when a video signal is being input through the Component video ports.
This setting adjusts the threshold at which dark areas of the image are rendered black
(0 IRE). For compatibility with most DVD and video equipment sold in the United
States, leave this setting at 0%. Check your video equipment’s specifications to be sure of
the correct setting.
■ Epson Super White
Note: This setting can be used only when the signal is input through the HDMI 1 or HDMI 2
ports with the Color Mode set to Natural or Cinema (see page 37).
If bright parts of the image are washed out or overexposed (when the input signal
contains values over 100 IRE), turn this setting on to compensate.
■ HDMI Video Range
Note: This setting can be used only when HDMI 1 or HDMI 2 is selected as the image source
(see page 26). This setting cannot be used when Epson Super White is set to On.
If your video equipment has an HDMI port and you’ve connected it to the projector
using an HDMI cable, set the level of the projector to match that of the video equipment.
■ Power Consumption
This setting controls the light output from the projector. On Normal, the projector
produces a brighter image and the lamp uses more power. To save power and extend the
life of the lamp, select
ECO.
Signal > Advanced > Setup Level
Image > Advanced > Epson Super White
Signal > Advanced > HDMI Video Range
Image > Power Consumption