Filter
Top Products
Setting Up the Projector 23
If you press the Source button on the projector,
you see a menu of available sources.
Press the u or d button to highlight a source and press the
Select button.
If the Component source is selected, press the
Compo. button on the remote control to
display the following menu:
Press the u or d button to highlight
YCbCr or YPbPr, or select Auto so the projector can
automatically detect the Component source type. Then press the
Select button.
Note: If an image does not appear, check the troubleshooting tips on page 56.
To temporarily turn off the image and darken the screen, press the Blank button. Press the Blank
button again to return to normal viewing.
Source button