Filter
Top Products
Paper Handling
1.
Make sure that the printer is turned on and that the paper release
lever is set forward to
the
continuous paper position.
Note: For both the standard width printer and wide carriage
printer, this is the forward continuous feed position.
2.
Set
the
first three holes of
the
continuous paper onto the built-in
push tractor as described in Chapter 2.
3.
Press
the LOAD/EJECT
button to load the continuous paper; then
press the
FORM FEED
button. This advances
the
paper one page so
that you can fit the paper onto the pull tractor.
Using the Printer Options
5-27