Filter
Top Products
20 - Parts, Names and Operations
Range of Remote Control Operations
Depending on the distance and angle from the main unit’s light receiving area, there are cases
where the remote control will not function. Ensure that the remote control is used within the fol-
lowing conditions:
● Operable distance: Approximately 10 meters
● Operable range:
Point
· Ensure that the [R/C ON OFF] switch is set at [ON] when using the remote control unit.
· Aim the remote control at the projector’s light-receiving area.
· There are cases where the operable distance (approximately 10 meters) of the remote
control is diminished when signals are reflected off screens depending on the type of
screen in use.
· Ensure that sunlight and florescent lighting is not shone directly into the projector’s light-
receiving area.
· If the remote control will not function or malfunctions, there is a possibility that the batter-
ies need changing. In this event, replace the batteries accordingly.
· Use the optional remote control receiver if it is to be used at a distance of 10m or more.
(Front Panel)
(
Rear Panel)
Approximately 30
degrees
Approximately 30
degrees
Light-emitting area on
the remote control
Approximately 15
degrees
Approximately 15
degrees
Approximately 15
degrees
Approximately 15
degrees