Filter
Top Products
(3) Difference between ESC K and ESC L
The normal-density mode is accessed with ESC K. The dual-density mode is ac-
cessed with ESC L
MSB
-0
I
-
Direction of print head movement
0
LSB
-0
The print head fires space
/
between normal dot positions
(Print speed reduces to
-
half the speed in normal-
density printing.)
a) Normal density
b) Dual density
Fig. 66 Normal-Density and Dual-Density Modes
NOTE: Print alignment under the friction feed.
EPSON is carefully applying printer mechanisms of better quality for MX-82
F/T. However, due to the nature of friction feed in which paper may slip, it is
not available to use the bit image mode while feeding the cut sheet or the
roll paper in the MX-82 F/T. If the accuracy of line feed is critical, the fanfold
paper must be used.
-75-