Filter
Top Products
2
Notices
Important Safety Instructions
Before using your NX110 Series, read and follow these safety instructions:
■ Be sure to follow all warnings and instructions marked on the NX110 Series.
■ Use only the type of power source indicated on the NX110 Series label.
■ Use only the power cord that comes with the NX110 Series. Use of another cord may
cause fires or shock. Do not use the cord with any other equipment.
■ Place the NX110 Series near a wall outlet where the plug can be easily unplugged.
■ If you won’t be using the NX110 Series for a long period, unplug the power cord
from the electrical outlet.
■ Always turn off the NX110 Series using the P On button, and wait until the P On
light stops flashing before unplugging the printer or cutting off power to the electrical
outlet.
■ Avoid plugging the NX110 Series into an outlet on the same circuit as a photo copier
or air control system that regularly switches on and off, or on an outlet controlled by a
wall switch or timer.
■ Do not let the power cord become damaged or frayed.
■ If you use an extension cord with the NX110 Series, make sure the total ampere
rating of the devices plugged into the extension cord does not exceed the cord’s
ampere rating. Also, make sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet’s ampere rating.
■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■ Leave enough room around the NX110 Series for sufficient ventilation. Do not block
or cover openings in the case or insert objects through the slots.
■ Do not place or store the NX110 Series near a radiator or heating vent, in a dusty or
moist environment, in direct sunlight, or outdoors.
■ Keep the NX110 Series away from potential sources of electromagnetic interference,
such as loudspeakers or the base units of cordless telephones.
■ Do not use aerosol products that contain flammable gases inside or around the
NX110 Series. Doing so may cause fire.
English