Filter
Top Products
2 | Unpacking and assembling the printer
Unpacking and assembling the printer
Note: Unless otherwise indicated, the illustrations in this guide show the SureColor
®
P8000/P9000, but the
instructions apply to all models.
Follow these steps to assemble your printer and its stand.
Before you begin, make sure you have enough space to set up and use the printer—at least
12 inches (305 mm) on all sides in addition to the dimensions of the printer and stand:
• 53.4 × 35.6 inches (1356 × 903 mm) for the SC-P6000/SC-P7000
• 73.4 × 52 inches (1864 × 1318 mm) for the SC-P8000/SC-P9000
When choosing a place for the printer, choose a flat, stable location with adequate room for easy access and
ventilation. Avoid locations subject to direct sunlight, excessive heat, moisture, or dust. Also avoid
locations near potential sources of electromagnetic interference, such as loudspeakers, cordless phones,
TVs, or air conditioners.
WARNING: Four people are required to unpack and install the printer.
12 in. (305 mm)
12 in. (305 mm)
12 in. (305 mm)
12 in. (305 mm)