Filter
Top Products
69
R4C706
short.bk Rev. E
MAINT.FM A5 size
5/24/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
The printer will start cleaning the print head and the process
light will begin flashing. Print head cleaning takes about
thirty seconds to complete.
c
Caution:
Never turn off the printer while the Processing light is
flashing. Doing so may damage the printer.
3. When the Processing light stops flashing, print a nozzle check
pattern to confirm that the head is clean and to reset the
cleaning cycle.
If print quality has not improved after repeating this procedure
four or five times, turn the printer off and leave it alone overnight,
then try head cleaning again.
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see “Replacing an
Ink Cartridge” on page 61.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Cleaning the Printer
To keep your printer operating at its best, clean it thoroughly
several times a year as follows.
1. Unplug the printer’s power cord.
2. Remove any paper from the sheet feeder.