Filter
Top Products
Maintaining the Projector 147
4. Turn the projector over. Press in on the tabs and lift up the lamp
cover.
5. Loosen the two screws holding the lamp in place (you don’t need
to remove them).
6. Hold the lamp as shown and pull it straight out.
7. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
Loosen, but don’t
remove these screws
note
The lamp component
contains mercury. Please
consult your state and local
regulations regarding proper
disposal or recycling. Do not
place in the trash.